How do I pair my Uclear helmet?
How do I pair my Uclear helmet?
How do I pair my Uclear helmet?
Turn your UCLEAR control unit on. Press the Up and Down buttons on your UCLEAR unit to enable pairing. You should see your UCLEAR come up on your device as an option and be able to select it on the device. If your device asks for a passcode, it is 0000.
Can Uclear connect to Cardo?
YES! With our latest firmware update you can pair with other brand Bluetooth communication systems.
How do I pair my Uclear amp?
Turn on the Phone’s Bluetooth, search and select for your AMP Model in your phone. Set your [Other brand] intercom device in pairing mode. Power on the AMP unit by pressing the power button 10 seconds until LED blinks purple. Pairing is successful when AMP LED blinks blue.
How do I pair UClear infinity?
UClear DynaMESH
- Motion devices ON.
- Press and hold ‘Quick Access’ on all devices to be paired for five (5) seconds, LEDs blink Purple.
- Verify that all LEDs in the desired grouping are blinking Purple.
- Now press ‘Power’ on any Motion device to initiate the actual pairing process; as a unit pairs, their LED goes Green.
How do I pair UClear Motion 4?
Press POWER on any MOTION device to initiate pairing process. The units will blink green once they are connected. The last unit to pair continues to blink purple for 15 secs before system ends the pairing process. Optional: Press POWER once on the last unit blinking purple to end pairing manually.
Are Sena and UClear compatible?
Just hold up on the UClear unit for 2 seconds and activate “phone pairing” mode on the Sena and both units will be connected for intercom. I hope this helps if you are having difficulties trying to get your UClear to pair with a Sena unit.
How do I pair my UClear HBC200?
Hold Up and Down buttons together for 2 seconds. The status indicator light will blink blue then red. > From your mobile phone Bluetooth menu, search for ‘UCLEAR HBC200’. > If your phone requires a password, enter ‘0000’.
How do I pair my UClear motion to infinity?
How do I pair UClear motion 6?
How do I reset my UClear?
When the Unit is powered on, Press and hold down all three buttons at the same time until you see the power light go out and the controller unit turn off.