How do I log into my Belkin wireless router?

How do I log into my Belkin wireless router?

How do I log into my Belkin wireless router?

Accessing the router’s web-based setup page

  1. Launch a web browser.
  2. Enter “https://router” or the router’s default IP address, 192.168.
  3. You will be asked to log in using the router’s admin password. If you have not set a custom password, just leave the Password field blank then click Submit.

How do I access my router page?

How to access the router’s web interface

  1. Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
  2. Enter your login credentials in the fields provided. The default password is admin.
  3. To know if you have successfully logged in to the web interface, the screen below should appear.

How do you reset your Belkin router?

Reset Button

  1. Locate the “Reset” button on the Belkin router.
  2. Push the “Reset” button and then release it to reset the router.
  3. Push the “Reset” button and hold it for at least 10 seconds to start the “Restore to Factory Defaults” process.
  4. Release the button after the 10-second minimum.

How do I connect to my Belkin router?

Connect the modem to the first router. Use an Ethernet cable to connect to the WAN port of a router to the WAN/Internet port of the high-speed modem.

  • Connect Router 1 to a computer. Use an Ethernet cable to connect from one of Router 1’s LAN ports to a computer’s Ethernet port.
  • Turn on the modem and Router 1.
  • Open a web browser.

    • How to hook up Belkin wireless router?

    Disconnect the power from Router 2. Now that Router 2’s all set up,it’s a good idea to give it a restart—though,for now,leave the power unplugged instead

  • Connect the first router to the second router. Use an Ethernet cable to connect to a LAN port on Router 1.
  • Plug Router 2 back in and turn it on.

    • How do you secure your Belkin wireless router?

    – Allowed Client Type – Authentication – Password (PSK) Type – Password (PSK) – Guest Password (PSK) – This feature is disabled by default. If you want to enable this feature on your Belkin router, enter a password on the Guest Password (PSK) field.

    How to unlock Belkin wireless router?

    Router user name and password. Step 1: Connect the computer to one of the four ethernet ports on the router. Step 2: Launch a web browser such as Internet Explorer® or Safari® and enter the IP address of your Belkin router in the Address bar then, press [Enter]. The default IP address of Belkin routers is 192.168.2.1.