How do you change a source 4 bulb?
How do you change a source 4 bulb?
How do you change a source 4 bulb?
- Loosen the beam focus knob located under the barrel as shown in Figure 4.
- Slide the lens tube forward or backward to achieve the desired beam edge.
- Once the fixture is focused, tighten the beam focus knob.
- WARNING! Let the lamp cool before replacing.
- Figure 2.
What is a source four light?
The Electronic Theatre Controls (ETC) Source Four (also known unofficially as Source 4 or S4) is an ellipsoidal reflector spotlight (ERS) used in stage lighting.
How heavy is a source 4 light?
16.3 lb
ETC Source Four Specs
| Rating | 375, 575, 750 Watts |
|---|---|
| Cable | 3′, fiberglass sheath, Edison Plug |
| Focusing | 50° Tube, Stainless steel shutters |
| Weight | 16.3 lb (7.4 kg) with C-Clamp |
| Dimensions | 20.1 – 22.8 x 21.3 x 12.4″ (52 – 58 x 54 x 31 cm) with C-Clamp |
How many amps does a source 4 use?
18-20 amps
Answers: HID inrush can draw upwards of 18-20 amps on a 120V service.
How do you change a light bulb in a high place?
Bulb Changing Poles are a great way to safely and easily change your light bulbs in high ceiling areas, without the need for an extra pair of hands or getting up onto a tall step ladder yourself. With telescopic poles you can adjust them to fit any height so they’re always accessible even when reaching 30ft plus.
How do you change track lighting lights?
How to Change Track Lighting
- Turn off ALL electricity to the room/ fixture. Back to The Home Depot I went.
- Remove the Old Track Light. My track was screwed into the beam, so I simply needed a drill to unscrew the track from the ceiling.
- Disconnect Wires.
- Reconnect the new wires.
- Reattach the track.
- Attach the new lights.