How big is a standard bathroom in Australia?

How big is a standard bathroom in Australia?

3m x 2m
A typical bathroom is 3m x 2m, a regular one 3.5m x 2.5m, and a large one 4m x 5m in size. You can fit a shower chamber into a 900mm x 900mm footprint, but a 900mm x 1200mm area is far more pleasant. The size of a typical bath is 1500mm x 720mm x 400mm deep.

What is the standard size of a full bath?

around 36-40 square feet
Full Bathroom Sizes A full bathroom consists of a shower, a sink, a bathtub and a toilet. It is only considered a full bath if it contains these three items and usually needs to be around 36-40 square feet because of the size requirements or 5×8.

How much space does a bath take up?

While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide.

What is the minimum size for a shower in Australia?

900mm x 900mm
The minimum size for walk in shower Australia is 900mm x 900mm. But while walk in shower dimensions indicate a minimum shower width and depth, these showers are very often larger than that. In general, a standard walk in shower size tends to be 1000mm width and 1800mm depth.

What size should an ensuite be?

The average size of an en-suite bathroom or shower room is approximately 1200 mm wide x 2100 mm long. It’s also possible, with careful planning and design considerations, to make a functional en-suite in a much smaller space.

How do you measure a bath?

To measure the length of free-standing baths, the height and width are measured using the top edge or lip. For the depth, measure from the floor to the top edge and will include the bathtub’s feet if you’re buying this style of free-standing tub.

How wide is a bathtub Australia?

around 70 wide
Bathtub Sizes Australia The average tub in Australia is around 180cm long and around 70 wide. If the length of the tub is greatest than 180cm, that means it can fit two people inside with ease.

How much room do you need around a bathtub Australia?

Freestanding bathtubs require a tiled and waterproof floor, and at least 100–150mm of space on all sides.

How big is a small ensuite?

What is the smallest space you can fit an en-suite? This is a question we receive a lot. The answer varies, but generally the minimum space that you’ll need for an en-suite that is fitted with a basin, toilet and shower is approximately 0.8m by 1.8m.