How do you thread a bobbin on a Juki sewing machine?

How do you thread a bobbin on a Juki sewing machine?

Grab your bobbin and place it on the black knob for winding. Push it all the way on (to the left). Push the black metal piece connected to it forward. This will switch the machine from regular sewing to bobbin winding mode.

How do you thread an Overlock sewing machine?

How to Thread an Overlocker / Serger

1. Step 1: Open the machine.
2. Step 2: Raise the presser foot.
3. Step 3: Remove the presser foot and lower the knife.
4. Step 4: Raise the needles to the highest position.
5. Step 5: Pull up the retractable thread stand fully.
6. Step 6: Place thread into pre-tension guide at the top of the machine.

What thread do you use for a serger?

Polyarn is a premium “woollie-like” texturized polyester thread. Polyarn has excellent elasticity, recovery, and flexibility, which makes Polyarn the top choice for garment construction when sewing on a serger. Because Polyarn is 100% polyester, it has a higher heat resistance than woollie nylon threads.

How do you thread a singer industrial Overlocker?

How to Thread the Singer 491D Industrial Sewing Machine

1. Step 1: Wrapping the Thread Hanger and First Thread Guide.
2. Step 2: Threading the Second Guide.
3. Step 3: Thread Around the Tension Knob.
4. Step 4: Threading Thread Take-up and Needle!

What are the different models of Juki machines?

There are a variety of models of industrial Juki machines (older ones, newer ones, etc.), but even if you have a slightly different machine than the one used here, the basic principles will be the same. I will go through the process step by step. This Instructable is built around the photo-guidelines, which are read left to right, top to bottom.

Which Juki sewing machine has the best dry head?

Best selling machine to eliminate oil stains on the sewing product. JUKI’s cutting-edge dry-head technology has been introduced to the MO-6700S, which has an established reputation for its excellent seam quality and higher productivity.

Where do you put the bobbin on a Kenmore sewing machine?

Once the bobbin is placed correctly in the bobbin casing, it is placed underneath the throat plate, in the underside of the machine. Position the bobbin so that the loose thread is coming from the top, and facing right.