How do you fix a busy signal on a fax machine?

How do you fix a busy signal on a fax machine?

No matter what fax number we dial to, it shows back as busy….It is always a good idea to initialize the FAX machine as follows:

1. unplug the telephone wire from the telephone wall jack.
2. unplug the AC power cord for 30 seconds.
3. plug the telephone cord back into the wall jack.
4. connect the power plug back into the AC receptable.

Why does my fax machine keep saying busy?

“No Response/Busy” indicates that the number you attempted to send a fax to was busy or didn’t respond to the incoming fax. The problem may be related to your line connection.

Why is my Brother fax machine not sending faxes?

Make sure your line connections are correct. A telephone line should be connected to the machine’s LINE jack from your VOIP device. 3. Press the Hook key again to verify the Brother machine has a dial tone.

Why is my fax machine ringing but not receiving faxes?

Fax issues where you can send, but not receive is typically an issue with the phone line or incorrect setup. If received faxes seem to be going through, but isn’t printing and there is no error message, refer to Faxes are received but not printing out (Fax Preview) to confirm that the Fax Preview feature isn’t enabled.

What does a busy fax signal mean?

What can I do? The message ‘No Response/Busy’ on your Brother machine indicates that the number you attempted to send to was busy or did not respond to your incoming fax. The problem may be related to your line connection.

How many times does a fax redial on busy?

If you are sending a fax automatically and the line is busy, the machine will automatically redial one time after five minutes.

How do I know if my brother fax machine is working?

How to Test a Brother Fax Machine

1. Insert a document to fax into the fax machine’s page loader.
2. Dial 1-888-473-2963 (1-888-hpfaxme) on the fax machine’s keypad.
3. Press “Start” or “Send” on the fax machine to begin the transmission.
4. Wait a few moments for a return fax from the HP Fax Test Service line.

How do you troubleshoot a fax machine?

Fax Troubleshooting

1. Make sure your fax machine is connected to the phone line. There is a phone cord that connects the fax machine to a phone jack in the house and this is how it sends data to other fax machines.
2. Check for dial tone.
3. Check for interference.

How do I know if my Brother fax machine is working?

How do I get my Brother fax machine to receive faxes?

To turn Easy Receive on, follow these steps:

1. Press the FAX key.
2. Press MENU, 2 (Fax), 1 (Setup Receive), 3 (Easy Receive).
3. Press the UP OR DOWN ARROW key to select On.
4. Press the OK key.
5. Press the STOP/EXIT key.

Why would a fax not go through?

If you find your fax not working, it could be due to the following reasons: The fax number you’re trying to send your fax to is busy or unreachable. You are trying to send a fax to a number that is blocked or outside your area code. Your fax machine could not establish a connection with your telephone line or modem.