How fast does a Farmall Super C go?
How fast does a Farmall Super C go?
How fast does a Farmall Super C go?
3,033 ft/min
Farmall Super C
| Belt Pulley | |
|---|---|
| Diameter: | 8.5 inches 21 cm |
| Width: | 6 inches 15 cm |
| RPM: | 1363 |
| Speed: | 3,033 ft/min 924.46 meters/min |
How much horsepower does a Farmall Super C have?
The Farmall Super C was the 2nd model in the Super-series. Except for the white circular Super C logo on the hood sides, the new version looked exactly like the old one. A 1/8″ larger bore for the engine increased displacement from 113 to 123 ci and boosted the output to 24 belt hp.
How much is a 1956 Farmall tractor worth?
Welcome! Please use the navigational links on your left to explore our website.
| Model | Model Year | Price |
|---|---|---|
| IHC Farmall 100 | 1956 | 1200 |
| IHC Farmall 130 | 1957 | 2200 |
| IHC Farmall 140 | 1961 | 4100 |
| IHC Farmall 140 | 1967 | 1850 |
What is the point gap on a Farmall Super C?
That is the specs for the plug gap. If the engine has had the timing reset with the point gap at . 060 the timing will be way off if the points are again reset to .
What engine is in a Farmall Super C?
International Harvester C123
Farmall Super C Engine
| Engine Detail | |
|---|---|
| International Harvester C123 | |
| Displacement: | 122.7 ci 2.0 L |
| Bore/Stroke: | 3.125×4.00 inches 79 x 102 mm |
| Air cleaner: | oil bath |
How many quarts of oil does a Farmall Super C take?
Changed the oil and filter on my Super C last weekend. Everything completely drained, oil looked like your typical used oil, nothing out of the ordinary. Same with the filter. Put it all back together, dumped 5 quarts oil in and ran it for about 30 seconds to move it back into position in the garage and left it.
What motor is in a Farmall Super C?
| Farmall C | |
|---|---|
| Engine model | International Harvester C113 |
| Gross power | 23 horsepower (17 kW) |
| PTO power | 18.57 horsepower (13.85 kW) (belt) |
| Drawbar power | 21.12 horsepower (15.75 kW) |
What is the rarest IH tractor?
Farmall 1026
Production data The International, or standard version production totaled only 158. These totals are quite low compared to other tractor models built by International Harvester, and today the Farmall 1026 could be considered a rare tractor, and the International 1026 extremely rare.
How wide is a Farmall Super C?
The minimum width would be 88″. Tread width on the tricycle front end can be 6 3/4″, 9 1/2″ or 12 3/4″ depending on how you mound the wheels on the hubs. Tread width on the rear end is 47″ to 71″ with the wheels turned in, with the wheels turned out the tread is 56″ to 80″ Tread width for the 100″ axels is not given.
What motor does a Farmall Super C have?
The C is equipped with an International Harvester inline overhead-valve 4-cylinder engine with 123-cubic-inch (2,020-cubic-centimetre) displacement. The sliding-gear transmission has five total gears: four forward and one reverse.