Is Farecla G3 any good?
Is Farecla G3 any good?
Is Farecla G3 any good?
Once again, Farecla’s product delivers the most effective combination of scratch removal and a shiny finish. It removed all trace of our self-inflicted mark at the first attempt, matched only by T-Cut, although the veteran paste left nowhere near as good a finish.
What is Farecla G3 used for?
G3 Regular Grade Paste is a rubbing compound recommended for use on OEM and refinish paint systems to reliably cut P1500 or finer sanding marks. This versatile product can be used by hand or machine, to deliver permanent results – no fillers.
What is the difference between Farecla G3 and G6?
The difference between these products is that G3 Paste is designed for use on Medium Solids paint systems; G3 Liquid on High Solids; and G6 Paste on very aged paints. These products will all work on scratches as long as they haven’t penetrated through to the primer layer.
How do you use Farecla G3 regular grade?
➢ Apply G3 to the surface using a clean damp cotton cloth and then rub over the area using firm backwards and forwards movements. The direction of these movements should be changed regularly to ensure a smooth and even coverage of the area.
Can you use G3 on glass?
Can G3 Professional Scratch Remover be used on bare plastics or glass? No. G3 Professional Scratch Remover can only be used on painted car surfaces.
What grit is Farecla G3?
What grit is Farecla G3? Farecla G3 Compound 3 kg (medium/fine) This is a medium/fine compound for use after 1200/1500 grit paper.
What is the best cutting compound for cars?
Comparison of best car scratch removers
| Best scratch remover | Brand | Name |
|---|---|---|
| Ultrafine scratches | Chemical Guys | VSS Scratch and Swirl Remover |
| Small scratches | Carfidant | Scratch and Swirl Remover |
| Deep scratches | 3D | One Professional Cutting, Polishing and Finishing Compound |
| Complete kit | Adam’s | Car Scratch & Swirl Remover Hand Correction System |
How do you polish scratches out of glass?
Directions:
- Clean the area first and let it dry.
- Apply a small amount of toothpaste to a lightly damp rag and use small, circular motions with a bit of pressure over the scratch.
- Keep rubbing for about 30 seconds.
- Use a clean rag to wipe away the excess toothpaste and see if the scratch has been polished away.
What is the difference between G3 and G6?
The difference between these products is that G3 Paste is designed for use on Medium Solids paint systems; G3 Liquid on High Solids; and G6 Paste on very aged paints.