What is the metric value for EIGRP?
What is the metric value for EIGRP?
What is the metric value for EIGRP?
EIGRP Metric K Values Explained with Examples
| K-Value | Component | Description |
|---|---|---|
| K1 | Bandwidth | Lowest bandwidth of the route |
| K2 | Load | Worst load on the route based on the packet rate |
| K3 | Delay | Cumulative interface delay of the route |
| K4 | Reliability | Worst reliability of the route |
Does MTU affect EIGRP?
I known that IP MTU mismatch will not prevent EIGRP neighborhood, but it does impact the neighborhood operation.
What is MTU metric?
The maximum transmission unit (MTU) is the largest size frame or packet — in bytes or octets (eight-bit bytes) — that can be transmitted across a data link. It is most used in reference to packet size on an Ethernet network using the Internet Protocol (IP).
What is the default hold interval for EIGRP?
EIGRP uses a default Hello timer of 5 seconds and a default Hold timer of 15 on LAN interfaces.
Which bandwidth value is used when calculating the Eigrp metric of a route?
Bandwidth: The bandwidth value used in the EIGRP metric calculation is determined by dividing 10,000,000 by the bandwidth (in kbps) of the slowest link along the path to the destination network. Delay: Unlike bandwidth, which represents the “weakest link,” the delay value is cumulative.
Why is MTU size 1500?
Since the backbone of the internet is now mostly made up of ethernet links, the de facto maximum size of a packet is now unofficially set to 1500 bytes to avoid packets being fragmented down links.
How do I set bandwidth in EIGRP?
To configure the percentage of bandwidth that can be used by EIGRP for IPv6 on an interface, use the ipv6 bandwidth-percent eigrp command in interface configuration mode. To restore the default value, use the no form of this command.