What should you do every time before you leave the lab select one or more?

What should you do every time before you leave the lab select one or more?

The last thing you should do before leaving the lab, after an experiment, is to wash your hands. Most chemicals are toxic to some extent, so clean your hands before leaving. Take appropriate action, then notify the instructor. You do not need permission to use safety equipment.

Which steps are necessary for cleaning a spill involving broken glass?

Using tongs or forceps, place broken glass/sharps in sharps container. Use dust pan and broom for shattered glass. Cover the spill area with absorbent materials such as Green-Z, paper towels, SSS clean-up powder. Remove the absorbent material.

What is the first thing you should do in a lab?

List four things students should be before beginning any lab. Read instructions, Tie back long hair, Roll back loose sleeves, Put on safety goggles. List two things students should do after a lab. Wash hands with soap and water, Clean up your work area.

What is the proper procedure for cleaning up a spill?

Spill Procedures

1. LEAVE THE CABINET TURNED ON.
2. Put on gloves and a lab coat.
3. Spray or wipe cabinet walls, work surfaces, and equipment with disinfectant equivalent to a 1:10 bleach solution.
4. Wait at least 20 minutes.
5. Soak up disinfectant and spill with paper towels.

What is the most important safety rule?

The most important lab safety rule is to know the location of and how to use safety equipment, such as a fire extinguisher.

How do you handle broken glass?

How Do I Handle Contaminated Broken Glass?

1. Confine the spill to a limited area. Barricade and isolate the area to prevent spread of contamination.
2. Pick up broken glass with tongs, forceps, or dustpan. Place the glass into an EHSO dry waste container.
3. Use appropriate neutralizer and absorbents to mitigate the spill.
4. Contact EHSO for chemical disposal pick up.

Which of the following is a safe procedure concerning the use of glassware?

Handle all glassware with care. To protect your hands, wear heavy cloth gloves or wrap toweling around the glass and the tubing, stopper, or cork, and gently push in the glass. Do not pick up broken glass with your bare hands.

Which are the two areas where you should be safe on the road?

With lesser traffic merging in the middle lane, one should prefer driving in the middle lane as it is the safest to drive in and also, there’s lesser risk of meeting with an accident….These include:

• Driving License.
• Registration Certificate (RC) of the car.
• Pollution Under Control (PUC) Certificate.
• Car Insurance.

What do you have to do before leaving the lab to make sure you don’t carry traces?

What do you have to do before leaving the lab, to make sure you don’t carry traces of chemicals outside? Take off your lab coat and then wash your hands.

What should you always do at the end of a lab?

What should you always do at the end of the lab? clean up.

What should you do if you break glassware in the lab?

If you are cut by glassware:

1. Allow the wound to bleed, but do not massage it to remove any remaining broken glass.
2. Wash the wound with warm water and soap.
3. Apply first aid and seek medical attention.
4. Follow your facility’s safety plan if the injury is severe or if you were exposed to infectious materials.

How do you follow safety rules?

General Precautions

1. Your safety is your personal responsibility.
2. Always follow the correct procedures.
3. Never take shortcuts.
4. Take responsibility and clean up if you made a mess.
5. Clean and organize your workspace.
6. Ensure a clear and easy route to emergency exits and equipment.
7. Be alert and awake on the job.